狠狠的日_www一区二区_99精品99_久久久久综合_aaa在线_国产精品高清在线

英國GRIMM格林進口電動隔膜泵概述： 

          進口電動隔膜泵，采用擺線針輪減速機傳動，通過曲軸滑塊機構帶動雙隔膜作往復運動，使工作腔容積發生交替變化從而達到將液體不斷地吸入和排出。同時，近年來由于隔膜材質取得了突破性的進展，大大地延長隔膜的使用壽命，因此被越來越廣泛地替代部分離心泵、螺桿泵來應用于石化、陶瓷、冶金等行業。

英國GRIMM格林進口電動隔膜泵工作原理：

          電機與減速機通過軸承箱帶動曲軸旋轉，由變向機構將曲軸端的圓周運動轉變成滑動桿的軸向移動，再帶動隔膜往復運動。在左右兩個泵腔內，裝有上下四個單向球閥、隔膜的運動造成工作腔的容積的改變，迫使四個單向球閥交替地開啟和關閉，從而將液體不斷地吸入和排出。

英國GRIMM格林進口電動隔膜泵性能特點：
進口電動隔膜泵既能抽送流動的流體，又能輸送一些不易流動的介質，具有自吸泵、雜質泵等輸送機械的許多優點，并可調節流量。
1、使用方便，不需灌飲用水，工作可靠，只需通電即可使用。
2、電動隔膜泵本身無軸封，大大延長了使用壽命。
3、由于隔膜將輸送介質和傳動機械件分開，所以介質絕對不會向外泄露。
4、結構簡單，損件少，安裝維修方便。泵輸送的介質不會接觸到泵的連桿、軸承等運動部件，從而減小部件磨損和性能下降。
5、可輸送較粘稠液體(10000厘泊以下)。
6、流動寬敞，通過性能好，允許通過最大顆粒直徑9.4mm，抽送泥漿、雜質式，對泵磨損甚微。
7、工作環境范圍：5～65℃，輸送介質范圍：-20℃～150℃。
8、泵體介質過流部分，可根據用戶要求不同，分為鑄鋼、不銹鋼、鋁合金、氟塑料等。
9、根據介質不同，隔膜可分為氯丁橡膠、氟橡膠、丁晴橡膠、聚四氟乙烯、特氟龍等。
10、隔膜泵電機可分為普通電機、防爆電機、變頻電機和電磁調速電機。

英國GRIMM格林進口電動隔膜泵技術參數： 

最大流量：12.8-480L/min
最大揚程：40-70m
出口壓力：0.4-0.7MPa
口       徑：10-125mm
轉       速：1450r/min
電機功率：0.55-5.5kw
最大虹吸高度(干抽或濕抽)：3-6m
最大輸送固體顆粒：2.5-9.4mm
每往復流量：0.15-7.6L
最大往復速度：63-85cpm

英國GRIMM格林進口電動隔膜泵主要用途： 

1、各種劇毒、易燃、易揮發液體。
2、各種強酸、強堿、強腐蝕液體。
3、可輸送較高溫度的介質150℃。
4、作為各種壓濾機前級送壓裝置。
5、熱水回收及循環。
6、油罐車、油庫、油品裝卸。
7、泵吸泡菜、果醬、土豆泥、巧克力等。
8、泵吸油漆、樹膠、顏料粘合劑。
9、各種瓷器釉漿、水泥灌漿、灰漿、泥漿。
10、各種橡膠漿乳膠、有機溶劑、填料。
11、用泵為油輪駁船清倉吸取倉內污水及剩油。
12、啤酒花及發酵粉稀漿、糖漿、糖蜜。
13、泵吸礦井、坑道、隧道、下水道中污水、沉淀物。
14、各種特殊介質的吸送。

UK GRIMM Imported electric diaphragm pump summary:

         Imported electric diaphragm pump, the cycloid reducer drive, through the crank slider mechanism driven by double diaphragm reciprocating motion, so that the working chamber volume change alternately so as to achieve the continuous suction and discharge liquid. At the same time, in recent years due to the material of diaphragm achieved a breakthrough, greatly prolong the service life of the diaphragm, so it is more and more widely to replace part of centrifugal pump, screw pump used in petrochemical, ceramics, metallurgy and other industries.

UK GRIMM Imported electric diaphragm pump working principle:

           The motor and the reducer drive the crankshaft through the bearing box, and the circumferential movement of the crankshaft end is changed into the axial movement of the sliding rod by the direction changing mechanism, and then the reciprocating movement of the diaphragm is driven. In the two movement of the pump cavity, four one-way valve, diaphragm is provided with a working cavity caused by the volume change, forcing the four one-way valve alternately opened and closed, and the liquid suction and discharge continuously.

UK GRIMM Imported electric diaphragm pump performance characteristics: 

Imported electric diaphragm pump can pump fluid flow, but also easy to transport some of the flow medium, has many advantages such as self suction pump, pump and other impurities conveying machinery, and can adjust the flow.

1. Easy to use, no need to drink water, the work is reliable, just need to electrify can use.

2. The electric diaphragm pump itself has no shaft seal, which greatly prolongs the service life.

3. Because the diaphragm will transport medium and drive mechanical parts separate, so the media will not leak out.

4. Simple structure, less damage, convenient installation and maintenance. Pumps transport medium will not touch the pump connecting rod, bearings and other moving parts, thereby reducing parts wear and performance degradation.

5. Can carry more viscous liquid (below 10000 CPS).

6. Wide flow and good performance, to allow the maximum particle diameter of 9.4mm, pumping mud and impurities, little wear on the pump.

7. The working environment range: 5~65 degrees, the transport medium range: -20 ~ 150 DEG C.

8, Pump body medium flow part, according to user requirements are different, divided into cast steel, stainless steel, aluminum alloy, fluorine plastic, etc..

9. According to the different media, the diaphragm can be divided into chloroprene rubber, fluorine rubber, nitrile rubber, PTFE, Teflon etc..

10. Diaphragm pump motor can be divided into ordinary motors, explosion-proof motors, frequency conversion motor and electromagnetic speed regulating motor.

UK GRIMM Imported electric diaphragm pump technical parameter:

Maximum flow: 12.8-480L/min

Maximum lift: 40-70m

Outlet pressure: 0.4-0.7MPa

Caliber: 10-125mm

Speed: 1450r/min

Motor power: 0.55-5.5kw

Maximum siphon height (dry or wet):3-6m

The largest transport solid particles: 2.5-9.4mm

Per reciprocating flow: 0.15-7.6L

Maximum reciprocating speed: 63-85cpm

UK GRIMM Imported electric diaphragm pump main use:

1. A variety of highly toxic, flammable, volatile liquids.

2. All kinds of strong acid, alkali and strong corrosive liquid.

3. Can transport high temperature medium 150 degrees.

4. As the front pressure feeding device of various press filters.

5. Hot water recycling and recycling.

6. Oil tank, oil depot, oil loading and unloading.

7. Pump kimchi, jam, mashed potatoes, chocolate, etc..

8. Pump paint, gums, pigments, adhesives.

9. All kinds of porcelain glaze slurry, cement grouting, mortar, mud.

10. All kinds of rubber pulp, latex, organic solvents, fillers.

11. Pump for tanker, barge clearance, absorb the sewage and residual oil in the warehouse.

12. Hops and baking powder, syrup, syrup, molasses.

13. Pump suction, mine, tunnel, tunnel, sewage, sediment.

14. A variety of special media suction.

GRIMM中國：

    上海秉奇閥門有限公司為GRIMM公司在中國的總代理，是中國擁有GRIMM代理權及銷售權，主要為中國地區客戶提供服務與技術支持，同時，秉奇人員也積極參與總部技術培訓學習，并不斷掌握產品原理、實際運作、工程技術做為基石，完善對中國地區客戶需求。             

關于GRIMM：

          英國格林（GRIMM）國際有限公司是亞太地區流體控制領域的主要生產和供應商之一，公司總部位于克萊福德，擁有一支有經驗的研發隊伍，實行全球統一設計，統一標準，在水泵領域內處于領先地位。在許多個國家均有生產水泵基地，中國由上海秉奇閥門負責中國市場各項業務與技術支持中心，同時向中國市場銷售。

       英國格林（GRIMM）產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域，以及人們?nèi)粘Ｉ钪小?/span>

       英國格林（GRIMM）主要產品有：管道泵、離心泵、隔膜泵、磁力泵、真空泵、潛水泵、排污泵、計量泵、衛生級泵、羅茨風機等系列產品。

服務體系：

GRIMM品質：

       GRIMM公司注重產品質量及使用壽命，全部采用先進制造技術和生產設備，并堅持不懈研發新產品，為確保不間斷的全過程質量控制，在生產過程中采用(SPC)過程控制和(TQM)全面質量管理；GRIMM的嚴格規范實現了不讓品質拖節，有效保障產品每個細節達到的性能指標。

GRIMM專業：

       掌握核心的流體控制技術，提供市場領先的產品、服務和解決方案，幫助用戶提高效率，帶來至關重要的基礎設施。

GRIMM服務：

       我們與用戶緊密合作，支持一系列系統使用技術和文件報告，提供售前、售中、售后服務和技術支持，有了您的信任與支持，我們將更完善、更高效提供水泵流體技術方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

About GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英國格林總代理商：上海秉奇閥門有限公司，微信咨詢：

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory: